Practical, small holster for flashlights, knives, and multi-tools. Wide compatibility with adjustable lid. Secured by the strap with snap fastener or detachable bungee cord. Made from Cordura 700D Fabric; resistant to tears, scuffs and abrasions.
This is a pretty good case and a huge improvement over the stock case that comes with the lights. this case should be the standard case that just comes with the lights, pick your color and you have everything you need.
This is more of a pack attachment then a side carry holster – seems great for when I am backpacking out and want easy access to my flashlight and don’t want to dig through a bag to get it.
ideal for my outdoor camping trips.
Kind of big. Bigger than the original. I purchased this to replace the original that melted through when I was driving in a car and must have pushed the on button. I put this on the shelf and went back to the damaged case.
Have only carried it a couple of weeks now, but I really like it. Seems durably made, although I’m wondering how many openings the Velcro will take. The pd36r goes in easy and stays secure.
1 out of 1 people found this helpful. Was this review helpful to you?
I love the holster but the color seems to be off. Maybe they were miss labeled at the factory but I ordered a khaki and the one I received is definitely olive in color even though the package said khaki.
Great for multi tools and magazines. Or drone batteries. But it doesn’t fit any of the PD/ UC Flashlights at all. Way to wide. But I still have to say, I love the pouches to put spare mags, and batteries in. I have ordered like 5 of them. Please make a less wide version, and no bungie cord. Lol
1 out of 1 people found this helpful. Was this review helpful to you?
Not sure which flashlight the holster was intended for but it is much too bulky and wide for a PD35TAC. Its dimensions reminded me of a pouch for double column pistol magazines. Sure enough, a Glock 15-rd G22 mag fits well. So I suspect this is mostly a rebranded pistol magazine pouch, which likely kept the cost down but is than ideal for 1” diameter lights. It is very well constructed and should last through heavy use. But the pouch lacks the proper vertical stitched anchor point on the back webbing to allow the bungee cord to align properly for holding the flashlight instead of the Velcro strap. I really enjoy the thoughtful of my Fenix lights, but this holster is not well thought out for most Fenix lights. It should be about half as wide and have a proper anchor point for the bungee cord. Also a belt loop either adjustable or sized for more typical belts.
5 out of 5 people found this helpful. Was this review helpful to you?
So I bought 2 of these for my E25UE Flashlights. Honestly, they looked a little “puzzling” when I saw them on the Fenix site but when I received them in person, I was like “what in the world???”. This is the most over-engineered holster that I’ve ever seen. There are snaps, loops, a bungee, some velcro, and a rivet hole (for drainage???). I’m a college educated guy, but it took a bit of studying and a YouTube video to figure out that the bungee cord was just an alternate way to attach this holster to something else instead of a belt (backpack maybe? I don’t know). I eventually figured out how to remove the bungee (God help me if I ever need to put it back, lol) and how to adjust the velcro to allow for my long/tall light. My opinion is that my E25UE light is too long for this holster even though the Fenix site says it fits an E25 light. Almost half of the length of my light is exposed on each side of the holster which means that only half of the light is actually snug in the holster part. This makes me a bit uncomfortable that it might fall out of the holster while bending down or doing something other than just walking. Additionally, the belt loop is about 4” wide “vertically” so unless you’re wearing a 4” wide belt, the holster is going to slide up and down and move/twist around way too much. For durability, I think this holster would withstand a CAT5 Hurricane or Nuclear Disaster, so kudos there, but I really think you all put waaay too much thought into some things, but not enough into others.
5 out of 6 people found this helpful. Was this review helpful to you?
My blk. Holster Pd 35tac is very ugly &looks like disposable I don’t know who made this design? One time accidentally I did not realize my flashlight is on , & I feel hot on my side wase wen I check my pd 35 tac is on. The holster is burning start melting on my wase line , turn off right away. Theres a hole now on holster. PD35 is good but the holster is garbage. Bud impact to PD35.
0 out of 7 people found this helpful. Was this review helpful to you?
The material looks like it will hold up well. Using the velcro on both sides of the top flap makes it adjustable to any height.
My problem is that it states it works with the E25UE, and it does, just not well. The opening is far too large, which allows the flashlight to angle itself out of the flap. If I were to use this holster as an EDC, I am going to end up losing it when it falls out while I’m riding my ATV or snowmobile.
It’s probably fine for a larger battery light, but not a AA sized light.
2 out of 2 people found this helpful. Was this review helpful to you?
Bradley M. (verified owner) –
The wesite says this molle holster will fit the Fenix TK26R Tactical Flashlight. It does not!
Dianne (store manager) –
Please note that the strap on the holster is adjustable so that it fits longer lights.
Patrick C. (verified owner) –
Seems like a good holster, but I haven’t used it yet because I use the clip
Steve Mattie (verified owner) –
It’s a bit bigger thanI would have liked but overall it works perfectly – like every item I’ve ever purchased from Fenix
Matthew M. (verified owner) –
Multiple closure options. Can take molle or a belt. It’s great.
Scott M. (verified owner) –
This is a pretty good case and a huge improvement over the stock case that comes with the lights. this case should be the standard case that just comes with the lights, pick your color and you have everything you need.
Anonymous (verified owner) –
Well made. I change my tactical pencil from one of the sides so that it is readily accessible.
ADAM VONDENBENKEN (verified owner) –
This is more of a pack attachment then a side carry holster – seems great for when I am backpacking out and want easy access to my flashlight and don’t want to dig through a bag to get it.
ideal for my outdoor camping trips.
Thomas Brown (verified owner) –
I love my holster
Joe Kanoy (verified owner) –
Good quality
Jason Martin (verified owner) –
very well made product
Christopher Miller (verified owner) –
I use this flashlight holster for my Fenix PD36R. I’ve had zero issues attaching it to my exterior carrier at work.
Anonymous (verified owner) –
Kind of big. Bigger than the original. I purchased this to replace the original that melted through when I was driving in a car and must have pushed the on button. I put this on the shelf and went back to the damaged case.
Dianne (store manager) –
You can reach out to warranty on that.
Dustin Miller (verified owner) –
Great quality and sturdy
Ronald R. (verified owner) –
Perfect for my need.
Anonymous (verified owner) –
Fits perfectly on Safari nylon duty rig belt.
James Fitzsimmons (verified owner) –
Great fitting
JOHN (verified owner) –
very durable.
Amy F. (verified owner) –
Great high quality very satisfied with my purchase
Anonymous (verified owner) –
Excellent
Thomas Carpenter (verified owner) –
Not complicated and adjusts for other uses
Charlie Ronayne (verified owner) –
Vey nice holster made of high quality material. This is great because of the molle and belt capability.
James Perkins (verified owner) –
A little bit tight for my pd35 but quality is very good.
Thomas Edmonds (verified owner) –
I love it it’s a hundred times better than the one that came in the Box with the flashlight
Antonio Salazar (verified owner) –
Great product
Bruce A. (verified owner) –
Have only carried it a couple of weeks now, but I really like it. Seems durably made, although I’m wondering how many openings the Velcro will take. The pd36r goes in easy and stays secure.
Clifford (verified owner) –
I love the holster but the color seems to be off. Maybe they were miss labeled at the factory but I ordered a khaki and the one I received is definitely olive in color even though the package said khaki.
Clyde Ross (verified owner) –
Worked great on my Mollie gear would buy another
Paul S. (verified owner) –
As described. Great product.
Seth (verified owner) –
Great little holster, fastens nicely to my pac.
Michael (verified owner) –
Nice holster
Lance (verified owner) –
I like it for my tk25. It’s a little big for the pd35
Vladimir Doig –
Great for multi tools and magazines. Or drone batteries. But it doesn’t fit any of the PD/ UC Flashlights at all. Way to wide. But I still have to say, I love the pouches to put spare mags, and batteries in. I have ordered like 5 of them. Please make a less wide version, and no bungie cord. Lol
Anonymous (verified owner) –
Fits great on my duty belt. Fits my UC35 V2.0 perfectly.
Jeffrey (verified owner) –
I love it. My light fits perfect in the holster. Thanks
Randal Brown (verified owner) –
Great case for my Fenix light. Attached perfectly to my outer vest and hasn’t come loose once. Very well built. Definitely recommend it.
Tom P. (verified owner) –
Kind of bulky, and was hoping for horizontal carry option.
Wallace (verified owner) –
High quality – good value.
David S. (verified owner) –
Great quality…perfect fit!!
Brian Cambria (verified owner) –
Hate it. Too big and bulky compared to the one that came with it. Flashlight no longer lives on my belt.
Pathum R. (verified owner) –
Best flashlight tactical pouch ever. Wish it came with the light !
Jeff (verified owner) –
Not sure which flashlight the holster was intended for but it is much too bulky and wide for a PD35TAC. Its dimensions reminded me of a pouch for double column pistol magazines. Sure enough, a Glock 15-rd G22 mag fits well. So I suspect this is mostly a rebranded pistol magazine pouch, which likely kept the cost down but is than ideal for 1” diameter lights. It is very well constructed and should last through heavy use. But the pouch lacks the proper vertical stitched anchor point on the back webbing to allow the bungee cord to align properly for holding the flashlight instead of the Velcro strap. I really enjoy the thoughtful of my Fenix lights, but this holster is not well thought out for most Fenix lights. It should be about half as wide and have a proper anchor point for the bungee cord. Also a belt loop either adjustable or sized for more typical belts.
Craig Emmerick (verified owner) –
They don’t fit my lights too good
Ronald Spilker (verified owner) –
Would have been nice to know that it’s only attachment, is MOLLE before I bought it. Seems well made otherwise. Not terribly useful as a belt holster.
oneway1963@comcast.net –
So I bought 2 of these for my E25UE Flashlights. Honestly, they looked a little “puzzling” when I saw them on the Fenix site but when I received them in person, I was like “what in the world???”. This is the most over-engineered holster that I’ve ever seen. There are snaps, loops, a bungee, some velcro, and a rivet hole (for drainage???). I’m a college educated guy, but it took a bit of studying and a YouTube video to figure out that the bungee cord was just an alternate way to attach this holster to something else instead of a belt (backpack maybe? I don’t know). I eventually figured out how to remove the bungee (God help me if I ever need to put it back, lol) and how to adjust the velcro to allow for my long/tall light. My opinion is that my E25UE light is too long for this holster even though the Fenix site says it fits an E25 light. Almost half of the length of my light is exposed on each side of the holster which means that only half of the light is actually snug in the holster part. This makes me a bit uncomfortable that it might fall out of the holster while bending down or doing something other than just walking. Additionally, the belt loop is about 4” wide “vertically” so unless you’re wearing a 4” wide belt, the holster is going to slide up and down and move/twist around way too much. For durability, I think this holster would withstand a CAT5 Hurricane or Nuclear Disaster, so kudos there, but I really think you all put waaay too much thought into some things, but not enough into others.
Russell Taylor (verified owner) –
Belt, pack, vest, this will snap on anything.
Jose G. (verified owner) –
good quality
David Maness –
Holder works great with my PD35TAC, fit my molle pack well too!
JAMES (verified owner) –
Functional and adjustable MOLLE holder. What more to say!
Ricky perez –
My blk. Holster Pd 35tac is very ugly &looks like disposable I don’t know who made this design? One time accidentally I did not realize my flashlight is on , & I feel hot on my side wase wen I check my pd 35 tac is on. The holster is burning start melting on my wase line , turn off right away. Theres a hole now on holster. PD35 is good but the holster is garbage. Bud impact to PD35.
Dan (verified owner) –
The material looks like it will hold up well. Using the velcro on both sides of the top flap makes it adjustable to any height.
My problem is that it states it works with the E25UE, and it does, just not well. The opening is far too large, which allows the flashlight to angle itself out of the flap. If I were to use this holster as an EDC, I am going to end up losing it when it falls out while I’m riding my ATV or snowmobile.
It’s probably fine for a larger battery light, but not a AA sized light.