Fenix WF11E Intrinsically Safe Flashlight

$80.00 $59.95

Out of stock

The Fenix WF11E is an intrinsically safe flashlight certified by IECEx, ATEX and SGS. It can be used in Zone 0, Zone 1 and Zone 2 where there is potentially explosive gas, and Zone 20, Zone 21 and Zone 22 in combustible dust atmospheres. Powered by three included AA batteries, this intrinsically safe flashlight has a maximum brightness of 200 lumens. The WF11E also includes a magnetic tail and magnetic body clip, allowing you to attach the light to any metal surface. Made from anti-static plastic, impact resistant to 1m, and IP67 rated waterproof and dustproof help make this flashlight the perfect tool for hazardous situations.

SKU: WF11ISORN/ABarcode: 6942870306636N/A
Max Lumens: 200
Modes: 3
Battery: AA

For commercial orders and large purchases, contact us at (888) 775-9996 x6 or GET A QUOTE

WARNING. Be aware of counterfeit Fenix merchandise in the U.S. marketplace. READ MORE >>

Specifications

Max Lumens: 200
Max Beam Distance: 607 feet (185 meters)
Max Runtime: 70 hours
Lighting Modes: 3 brightness levels
Bulb Type: Cree XP-G2 neutral white LED
Size: Length: 6.6” (167.5mm) Body: 0.9” (24mm) Head: 1.9” (49mm)
Weight: 5.6oz. (160g) excluding batteries
Battery: Three AA batteries (included)
Included: Three AA alkaline batteries, lanyard, spare O-ring
Warranty: Limited Lifetime Guarantee from Fenix Lighting USA
Fenix WF11E Intrinsically Safe Flashlight specs chart

More Information

Additional Features of the Fenix WF11E

  • Intrinsically safe flashlight for use in hazardous areas.
  • Cree XP-G2 neutral white LED with a lifespan of 50,000 hours.
  • Powered by three AA alkaline batteries
  • Three output levels, max 200 lumens.
  • Made of explosion-proof and antistatic plastics.
  • Magnetic light tail and body clip.
  • Physical reverse polarity protection, to protect from improper battery insertion.

Markings

  • Ex ia IIC T4 Ga
  • Ex ia IIIC T130℃ Da IP66/IP67
  • II 1G Ex ia IIC T4 Ga
  • II 1D Ex ia IIIC T130℃ Da IP66/IP67
  • Ex ia IIC T4 Ga
  • Ex iaD 20 T130℃

Runtime

Fenix WF11E Intrinsically Safe Flashlight runtime chart

On/Off

Press and hold the switch for 0.5 seconds to turn on/off the light.

 

Output Selection

With the light turned on, single click the switch to cycle through Low→Med→High.

 

Battery Specifications

Only the following batteries may be used in this model.  

TypeDimensionsNominal Voltage
ENERGIZER E91AA1.5V
DURACELL MN1500AA1.5V
RAYOVAC 815AA1.5V

Warning:

  1. Do not disassemble the light or replace battery in potentially explosive atmospheres.
  2. For your safety only use the abovementioned batteries.
  3. Do not mix batteries of different types and capacities. Doing so may cause danger, or damage the flashlight.

Battery Replacement

Unscrew the light head and remove the battery holder. Replace the battery and ensure it is inserted in accordance with polarity marks. Insert battery holder into the light body then tighten the light head.

 

Usage and Maintenance

  • Uses only the three recommended types of batteries.
  • If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage.
  • Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.

Warning

  • Do not disassemble the light or replace battery in potentially explosive atmospheres.
  • The flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone’s eyes.
  • Do not use in explosive atmospheres if the flashlight is with missing parts or its shell is obviously broken.

Q1. What is the product positioning of WF11E? And who are the target customers?

A: The Fenix WF11E is an intrinsically safe flashlight with magnetic tail and body clip, which emits a max output of 200 lumens. It has passed the necessary tests and was certified by IECEx, ATEX and SGS. Thus this product can be safely used in Zone 0, Zone 1 and Zone 2, where there is explosive gas mixture belongs to IIA, IIB and IIC; and it can be used in combustible dust areas: Zone 20, Zone 21 and Zone 22 as well, such as petroleum, chemical and textile industries, fire controlling, metallurgical areas, electric power stations and areas, and paper producing plants, etc.

 

Q2. What are the key features and benefits of WF11E?

A: 1) Made of explosion-proof and antistatic plastics.

   2) Three output levels, max 200 lumens.

   3) Magnetic light tail and body clip. 

   4) It has passed the necessary tests and was certified by IECEx, ATEX and SGS.

 

Q3. What are the safety certifications for the WF11E?

A: The WF11E has passed the necessary tests and was certified by IECEx, ATEX and SGS.

 

Q4. Can the WF11E be used in open-pit mines areas?
A: No, it can not be used in any mining area, no matter underground or surface mines.

    No compatible accessories available

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
E
Eric Waldhart
Not long enough ,

So far so good , let me use it for 6 months then I will give you a better review .You are to quick to get answers . A true test takes a lot longer for durability testing on the over all performance of the batteries to see how long they last to .

J
John Rizzuto

Professional grade. Well made and reliable.

k
kauluwehi salud

Good waterproofing. Used in pouring rain holding strong

A
Andy Gabel

It is pretty bright compared to other intrinsically safe options like pelican. The magnets are a nice touch.

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Add an Order Note (optional)Edit Order Note
BECOME A MEMBER and get
20% OFF your first purchase.

Fenix WF11E Intrinsically Safe Flashlight

$80.00 $59.95