Chat with us, powered by LiveChat

Fenix WF05E Intrinsically Safe Flashlight

Max Lumens: 85
Modes: 3
(2 customer reviews)

$45.00 $34.95

SKU: WF05ISBK Categories: , , ,

The WF05E intrinsically safe flashlight is designed for use in areas at risk of explosions, excluding mines. Certified by IECEx, ATEX and CSA to be used in Zone 1 and Zone 2 where there is potentially explosive gas, and Zone 21 and Zone 22 in combustible dust atmospheres. Powered by two included AAA batteries, the rotary head allows you to switch between three lighting modes up to a maximum 85 lumens. Anti-static clip, neutral white light and IP68 rated waterproof and dustproof round out the additional features that make this light the perfect tool for hazardous situations.

For commercial orders and large purchases, contact us at (888) 775-9996 x6, or
WARNING. Be aware of counterfeit Fenix merchandise in the U.S. marketplace.

Max Lumens: 85
Modes: 3


fenix wf05e specification chart

Length: 5.3” (134.5mm)
Body: 0.6” (14.9mm)
Head: 0.7” (19mm)

Weight: 1.3 oz. (38g) excluding batteries

Battery: Two AAA alkaline batteries

Included: Two AAA alkaline batteries, lanyard, spare O-ring

Warranty: Limited Lifetime Guarantee from Fenix Lighting USA

Ex ib IIC T4 Gb
Ex ib IIIC T130℃ Db IP66/IP68
II 2G Ex ib IIC T4 Gb
II 2D Ex ib IIIC T130℃ Db IP66/IP68
Ex ib IIC T4 Gb IP66/IP68;Ex ib IIIC T130℃ Db IP66/IP68
Class I, Zone 1, AEx ib IIC T4 Gb IP66/IP68; Zone 21, AEx ib IIIC T130℃ Db IP66/IP68

  • Intrinsically safe flashlight for use in hazardous areas.
  • Cree XP-G2 LED with a lifespan of 50,000 hours.
  • Powered by two AAA alkaline batteries as shown in the battery list below.
  • Three output levels, max 85 lumens.
  • Made of durable high-strength and oxidation-resistance aluminum.
  • Premium type HAIII hard-anodized anti-abrasive finish.
  • Physical reverse polarity protection, to protect from the improper battery insertion.

With the light switched off, turn the flashlight head clockwise to turn on the light.

With the light switched on, turn the flashlight head counterclockwise to turn off the light. Turn another half to avoid accidental activation.

Output Selection
Twist the light head to cycle through Off→Med→Off→High→Off→Low→Off.

Battery Replacement
Open the light head and replace the battery and ensure it is inserted in accordance with polarity marks, then tighten the light head.

Usage and Maintenance

  • Uses only the three recommended types of batteries.
  • If the light will not be used for an extended period, remove the battery, or the light could be damaged by electrolyte leakage.
  • Remove the battery in non-explosive environments or unscrew the light head one-half turn to prevent accidental activation during storage or transportation.
  • Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare.


  • Do not disassemble the light or replace battery in potentially explosive atmospheres.
  • Do not keep the light surface in contact with electric equipments in potentially explosive atmospheres.
  • Do not use in explosive atmospheres if the flashlight is with missing parts or its shell is obviously broken.
  • The flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight directly into anyone’s eyes.

2 reviews for Fenix WF05E Intrinsically Safe Flashlight

5 star
4 star
3 star
2 star
1 star
Powered by Customer Reviews Plugin
  1. Paul S. (verified owner)

    Haven’t had a chance to run it through it’s paces to give an adequate review, but so for so good!

    Was this review helpful to you?
  2. Monica (verified owner)

    I received it yesterday, and was very disappointed. Ut looks od very poor design and doesn’t even have and on/off button. On top of that, it is barely bright enough to light up 3 ft around me decently. Very, very disappointed!

    Uploaded image(s):

    Image #1 from Monica
    Was this review helpful to you?
    • Fenix Lighting U.S. (store manager)

      Contact the customer service team and they can get you a return tag and refund. The light is definitely not bright in low, but if you are going through the modes it definitely lights up well past 3 ft. Intrinsically safe lights have limits that must be followed for safety, so there is only so much you can do within these limits in materials and power solutions to gain more brightness and convenience.

Add a review

Your email address will not be published. Required fields are marked *